4H/4H-AThru-Hole | 4 Jaw Lathe Chuck
4H/4H-A(Thru-Hole)
Product Features
WEDGE-HOOK type is 4-jaw with the through-hole.
4-jaw chuck has four holes for controlling each jaw, one at a time.
4 jaw lathe chucks move independently and require operators to center the workpiece.
4 jaw chuck is mainly used for gripping square or octagon blocks.
4 jaw power chuck with an accuracy level between 0 and 0.001.
Matching surfaces of all parts hardened, ground, and lubricated directly.
High rigidity and high repeatability precision.
J is the hole diameter of the blank draw nut.
If not notified, AUTOGRIP will adopt the K Default as the K value.
K is the maximum thread specification and it could be customized.
Home
Product
Telephone
Message
